 |
Toldo
Newbie
Joined: 30 Oct 2003
Posts: 5
Location: United Kingdom
|
 Posted: Thu Oct 30, 2003 4:12 pm
Calibration
|
Not sure if it is just me, I can not get auto calibrate to work it applies the squelch, says calibrating then says failed and removes the squelch.
It also will not work from the loc command, it gets the line from the paste buffer but fails.
I have to rely on poeple posting the settings here (many thanks).
Can I fix this or work out the calibration some how?
I am running ACX Server 1.29 and Explorer Pro 3.33 |
|
|
|
|
ogz
Newbie
Joined: 30 Oct 2003
Posts: 2
Location: USA
|
Posted: Thu Oct 30, 2003 9:15 pm
|
I'm using acserv 1.29, have decal turned off and i'm not able to get it to autocalibrate either. Anyone who has the info please post it! :)
|
|
|
|
|
Zambu
Newbie
Joined: 02 Nov 2003
Posts: 1
Location: USA
|
Posted: Sun Nov 02, 2003 7:37 pm
|
I had no problem getting auto-calibrate to work. I did make sure to have decal turned off.
Here's what is stored in my acxserv.ini file:
[Memory]
Loc=39469292
Tag=6006648
Head=7857596
Base=0
HeadBase=0
Direct=0
Pointer=6276000
Offset=164
Offset2=48
ACVers=1.0.52.0
Hope this helps.
Cheers!
Zambu |
|
|
|
|
|
|
|
