Zugg Software :: View topic

Beginner Joined: 18 Nov 2007 Posts: 28

1.How should I predefine or auto adjust the distance between two rooms? Because at the default of 100% view, many rooms crowed each other on the map.
2.How can configure auto label the room name instead Vnum when draw a map?
3.how delete some special sentence such as the sky description from the room description?

Thank you very much.

GURU Joined: 23 Dec 2000 Posts: 4834 Location: USA

1. Not sure you can do this with CMud. May need to use Zmapper instead. (this assumes you aren't trying to directly connect to the map DB to do it that way)

2. Can't, don't think even ZMapper can either. (this assumes you aren't trying to directly connect to the map DB to do it that way)

3. you didn't provide enough details about your room info and configuration/#tag triggers.

Beginner Joined: 18 Nov 2007 Posts: 28

MattLofton,Thanks.
Then 3d question like this:

Posted: Sun Oct 04, 2009 7:17 pm

Probably the best way is to not store it at all by using the #TAG command. Remember you'll need to re-configure the mapper after you do this.

Wizard Joined: 22 Mar 2007 Posts: 2320

If there are specific phrases on their own line which you want to ignore in the room description, and there is a fairly limited number of such phrases, an alternative method of dealing with them is a trigger with an action of #NOMAP. This will tell the mapper to ignore the line matching the trigger.