 |
ReedN
Wizard
Joined: 04 Jan 2006
Posts: 1279
Location: Portland, Oregon
|
 Posted: Tue Jul 28, 2009 1:33 am
[3.10 Pro] AV trying to enter Cmud
|
Steps:
1) Renamed my old cmud program directory
2) Installed 3.10 Pro
3) Clicked on Cmud to open the program for the first time
4) Access Violation:
| Code: |
date/time : 2009-07-27, 18:30:51, 937ms
operating system : Windows XP Service Pack 3 build 2600
system language : English
system up time : 4 days 23 hours
program up time : 1 second
processors : 2x Genuine Intel(R) CPU @ 2.93GHz
physical memory : 2230/3326 MB (free/total)
free disk space : (C:) 32.48 GB
display mode : 1600x1200, 32 bit
process id : $1d78
allocated memory : 31.55 MB
executable : cMUDPro.exe
exec. date/time : 2009-07-27 16:10
version : 3.10.0.0
compiled with : BCB 2006/07
madExcept version : 3.0h
callstack crc : $4cb0112d, $45a9b36c, $45a9b36c
exception number : 1
exception class : EAccessViolation
exception message : Access violation at address 004A4FFC in module 'cMUDPro.exe'. Read of address 0000001C.
Main ($16d0):
004a4ffc +000 cMUDPro.exe Forms TCustomForm.GetTop
00b164e9 +051 cMUDPro.exe Progress 42 +3 OpenProgress
00f08c67 +21b cMUDPro.exe PkgDM 1867 +29 TPkg.SetDBFile
00f096ee +1be cMUDPro.exe PkgDM 2073 +29 TPkg.Open
00ec03fb +11f cMUDPro.exe PrefDat 3359 +14 PkgData.Load
00d9cc49 +275 cMUDPro.exe PARENT 2584 +111 TParentForm.NewWindow
00daa783 +04f cMUDPro.exe PARENT 8800 +29 TParentForm.FormShow
004a51e5 +015 cMUDPro.exe Forms TCustomForm.DoShow
005255d4 +01c cMUDPro.exe CustomForm 76 +7 TzCustomForm.DoShow
00b01a7e +046 cMUDPro.exe MultiForm 264 +2 TMultForm.DoShow
004a951d +0a9 cMUDPro.exe Forms TCustomForm.CMShowingChanged
004bf5eb +2bb cMUDPro.exe Controls TControl.WndProc
004c35ef +4fb cMUDPro.exe Controls TWinControl.WndProc
004a5b4f +553 cMUDPro.exe Forms TCustomForm.WndProc
00d4bfac +020 cMUDPro.exe DXSounds 2128 +9 TCustomDXSound.FormWndProc
00d49750 +00c cMUDPro.exe DXClass 635 +1 TControlSubClass.WndProc
004bf278 +024 cMUDPro.exe Controls TControl.Perform
004c2ab6 +112 cMUDPro.exe Controls TWinControl.UpdateShowing
004c2bf9 +0e5 cMUDPro.exe Controls TWinControl.UpdateControlState
004c54aa +026 cMUDPro.exe Controls TWinControl.CMVisibleChanged
004bf5eb +2bb cMUDPro.exe Controls TControl.WndProc
004c35ef +4fb cMUDPro.exe Controls TWinControl.WndProc
004a5b4f +553 cMUDPro.exe Forms TCustomForm.WndProc
00d4bfac +020 cMUDPro.exe DXSounds 2128 +9 TCustomDXSound.FormWndProc
00d49750 +00c cMUDPro.exe DXClass 635 +1 TControlSubClass.WndProc
004bf278 +024 cMUDPro.exe Controls TControl.Perform
004bde12 +026 cMUDPro.exe Controls TControl.SetVisible
004a5486 +03a cMUDPro.exe Forms TCustomForm.SetVisible
004a47d9 +071 cMUDPro.exe Forms TCustomForm.DoCreate
004a4378 +124 cMUDPro.exe Forms TCustomForm.Create
00525571 +01d cMUDPro.exe CustomForm 60 +2 TzCustomForm.Create
0072d0c5 +029 cMUDPro.exe International 41 +3 TInterForm.Create
0072db79 +039 cMUDPro.exe zsForm 88 +6 TzForm.Create
00b017cc +0d0 cMUDPro.exe MultiForm 168 +12 TMultForm.Create
00da9e21 +0bd cMUDPro.exe PARENT 8562 +14 TParentForm.Create
004ade76 +06e cMUDPro.exe Forms TApplication.CreateForm
00f67f1c +07c cMUDPro.exe cMUDPro 359 +18 initialization
7c912c21 +069 ntdll.dll RtlUnicodeStringToAnsiString
|
I've been able to side-step it by setting up an empty data directory and then importing my data in. |
|
|
|
|
Zugg
MASTER
Joined: 25 Sep 2000
Posts: 23379
Location: Colorado, USA
|
Posted: Tue Jul 28, 2009 4:14 am
|
I have no idea on this one. The error is related to opening one of your package files. You'll need to give me a procedure to reproduce it here.
|
|
|
|
|
ReedN
Wizard
Joined: 04 Jan 2006
Posts: 1279
Location: Portland, Oregon
|
Posted: Tue Jul 28, 2009 4:17 am
|
Unfortunately the crash report is all there is. I didn't want to wait around with a non-opening Cmud when I could try flushing out my directory to get around it.
If the crash report I posted helps, great. Otherwise hopefully it doesn't affect anyone else and was just an anomaly with my data directory. |
|
|
|
|
Moo
Apprentice
Joined: 10 Apr 2009
Posts: 145
|
Posted: Tue Jul 28, 2009 9:48 am
|
I get the same error upon opening 3.10 too.
But aren't the package files only opened when a session is chosen? Or are they all opened at the beginning?
"Forms/TCustomForm.GetTop" looks like a GUI thing and not a package type thing though..?
Next line is "Progress/OpenProgress".. So.. Could be an error with the new progress window/bar for package conversion? |
|
|
|
|
Moo
Apprentice
Joined: 10 Apr 2009
Posts: 145
|
Posted: Tue Jul 28, 2009 10:13 am
|
Hmm.. Some updates:
Moving all the "mud-specific" folders didn't change the error.
Renaming the "packages" folder changed the error to a different one ("SQL Error: library routine called out of sequence").
Creating a new, empty "packages" folder cured the errors entirely. So.. It must be something in there causing the problem.. |
|
|
|
|
Moo
Apprentice
Joined: 10 Apr 2009
Posts: 145
|
Posted: Tue Jul 28, 2009 10:18 am
|
Aha
Renaming/moving the "default.pkg" cures the error. |
|
|
|
|
Doxedon
Novice
Joined: 01 Dec 2007
Posts: 49
|
Posted: Tue Jul 28, 2009 10:21 am
|
Happening here too.. Occurs when immediately opening CMud. (Just installed it).
| Code: |
date/time : 2009-07-28, 20:15:26, 109ms
operating system : Windows XP Service Pack 3 build 2600
system language : English
system up time : 4 hours 7 minutes
program up time : 1 second
processors : 2x Intel(R) Pentium(R) 4 CPU 3.20GHz
physical memory : 415/1014 MB (free/total)
free disk space : (C:) 22.42 GB
display mode : 1024x768, 32 bit
process id : $1eb8
allocated memory : 24.94 MB
executable : cMUD.exe
exec. date/time : 2009-07-28 09:09
version : 3.10.0.0
compiled with : BCB 2006/07
madExcept version : 3.0h
contact name : fd
contact email : sdf@sg.com
callstack crc : $4671c045, $4f5b686f, $4f5b686f
exception number : 1
exception class : EAccessViolation
exception message : Access violation at address 004A0A34 in module 'cMUD.exe'. Read of address 0000001C.
Main ($1ec0):
004a0a34 +000 cMUD.exe Forms TCustomForm.GetTop
00a265a9 +051 cMUD.exe Progress 42 +3 OpenProgress
00da1cdf +21b cMUD.exe PkgDM 1867 +29 TPkg.SetDBFile
00da2766 +1be cMUD.exe PkgDM 2073 +29 TPkg.Open
00d5946f +11f cMUD.exe PrefDat 3359 +14 PkgData.Load
00c4a8ad +275 cMUD.exe PARENT 2584 +111 TParentForm.NewWindow
00c583e3 +04f cMUD.exe PARENT 8800 +29 TParentForm.FormShow
004a0c1d +015 cMUD.exe Forms TCustomForm.DoShow
00520e20 +01c cMUD.exe CustomForm 76 +7 TzCustomForm.DoShow
00a11b3e +046 cMUD.exe MultiForm 264 +2 TMultForm.DoShow
004a4f55 +0a9 cMUD.exe Forms TCustomForm.CMShowingChanged
004bb023 +2bb cMUD.exe Controls TControl.WndProc
004bf027 +4fb cMUD.exe Controls TWinControl.WndProc
004a1587 +553 cMUD.exe Forms TCustomForm.WndProc
00bf5904 +020 cMUD.exe DXSounds 2128 +9 TCustomDXSound.FormWndProc
00bf30a8 +00c cMUD.exe DXClass 635 +1 TControlSubClass.WndProc
004bacb0 +024 cMUD.exe Controls TControl.Perform
004be4ee +112 cMUD.exe Controls TWinControl.UpdateShowing
004be631 +0e5 cMUD.exe Controls TWinControl.UpdateControlState
004c0ee2 +026 cMUD.exe Controls TWinControl.CMVisibleChanged
004bb023 +2bb cMUD.exe Controls TControl.WndProc
004bf027 +4fb cMUD.exe Controls TWinControl.WndProc
004a1587 +553 cMUD.exe Forms TCustomForm.WndProc
00bf5904 +020 cMUD.exe DXSounds 2128 +9 TCustomDXSound.FormWndProc
00bf30a8 +00c cMUD.exe DXClass 635 +1 TControlSubClass.WndProc
004bacb0 +024 cMUD.exe Controls TControl.Perform
004b984a +026 cMUD.exe Controls TControl.SetVisible
004a0ebe +03a cMUD.exe Forms TCustomForm.SetVisible
004a0211 +071 cMUD.exe Forms TCustomForm.DoCreate
0049fdb0 +124 cMUD.exe Forms TCustomForm.Create
00520dbd +01d cMUD.exe CustomForm 60 +2 TzCustomForm.Create
00727655 +029 cMUD.exe International 41 +3 TInterForm.Create
00728109 +039 cMUD.exe zsForm 88 +6 TzForm.Create
00a1188c +0d0 cMUD.exe MultiForm 168 +12 TMultForm.Create
00c57a81 +0bd cMUD.exe PARENT 8562 +14 TParentForm.Create
004a98ae +06e cMUD.exe Forms TApplication.CreateForm
00dff150 +07c cMUD.exe CMUD 350 +18 initialization
7c912c21 +069 ntdll.dll RtlUnicodeStringToAnsiString
|
Probably related.. hope it helps?
Trying to exit CMUD.
| Code: |
date/time : 2009-07-28, 20:19:19, 984ms
computer name : DOXMAIN
user name : Doxedon <admin>
registered owner : Doxedon
operating system : Windows XP Service Pack 3 build 2600
system language : English
system up time : 4 hours 11 minutes
program up time : 1 minute 57 seconds
processors : 2x Intel(R) Pentium(R) 4 CPU 3.20GHz
physical memory : 382/1014 MB (free/total)
free disk space : (C:) 22.42 GB
display mode : 1024x768, 32 bit
process id : $11e4
allocated memory : 34.57 MB
executable : cMUD.exe
exec. date/time : 2009-07-28 09:09
version : 3.10.0.0
compiled with : BCB 2006/07
madExcept version : 3.0h
contact name : fd
contact email : sdf@sg.com
callstack crc : $e35da7e4, $f4fbab7e, $f4fbab7e
exception number : 2
exception class : EZSQLException
exception message : Requested database driver was not found.
Main ($1044):
00850f9a +04e cMUD.exe ZDbcIntfs 967 +3 TZDriverManager.GetConnectionWithParams
0089d667 +173 cMUD.exe ZConnection 658 +45 TZConnection.Connect
0089d0fb +02b cMUD.exe ZConnection 368 +7 TZConnection.SetConnected
00daad86 +0e2 cMUD.exe PkgDM 4841 +14 TPkg.Save
00d59cc7 +00f cMUD.exe PrefDat 4658 +1 PkgData.Save
00c4e411 +125 cMUD.exe PARENT 3995 +53 TParentForm.FormDestroy
004a024d +031 cMUD.exe Forms TCustomForm.DoDestroy
004a00d6 +052 cMUD.exe Forms TCustomForm.Destroy
00520dee +012 cMUD.exe CustomForm 65 +1 TzCustomForm.Destroy
00727691 +019 cMUD.exe International 47 +2 TInterForm.Destroy
0072813a +012 cMUD.exe zsForm 93 +1 TzForm.Destroy
00a11dfa +012 cMUD.exe MultiForm 338 +3 TMultForm.Destroy
0047afbf +047 cMUD.exe Classes TComponent.DestroyComponents
0049df76 +032 cMUD.exe Forms DoneApplication
0045151e +026 cMUD.exe SysUtils DoExitProc
00405c39 +021 cMUD.exe System 38 +0 @Halt0
00dff176 +0a2 cMUD.exe CMUD 358 +26 initialization
7c912c21 +069 ntdll.dll RtlUnicodeStringToAnsiString
|
|
|
|
|
|
Obyron
Novice
Joined: 29 Jan 2006
Posts: 40
Location: Aardwolf
|
Posted: Tue Jul 28, 2009 2:48 pm
|
Same crash here every time I try to start the program. Useless as tits on a boar.
| Code: |
date/time : 2009-07-28, 10:46:21, 76ms
computer name : STEPHEN-LAPTOP
user name : Stephen <admin>
registered owner : Microsoft / Microsoft
operating system : Windows Vista x64 Service Pack 2 build 6002
system language : English
system up time : 13 days
program up time : 1 second
processors : 2x AMD Turion(tm) 64 X2 Mobile Technology TL-60
physical memory : 861/2942 MB (free/total)
free disk space : (C:) 20.96 GB
display mode : 1280x800, 32 bit
process id : $17ac
allocated memory : 52.76 MB
executable : cMUD.exe
exec. date/time : 2009-07-27 19:09
version : 3.10.0.0
compiled with : BCB 2006/07
madExcept version : 3.0h
contact name : adsfa
contact email : asdfasdf@kdf.acom
callstack crc : $4671c045, $febb3ac7, $febb3ac7
exception number : 1
exception class : EAccessViolation
exception message : Access violation at address 004A0A34 in module 'cMUD.exe'. Read of address 0000001C.
Main ($1820):
004a0a34 +000 cMUD.exe Forms TCustomForm.GetTop
00a265a9 +051 cMUD.exe Progress 42 +3 OpenProgress
00da1cdf +21b cMUD.exe PkgDM 1867 +29 TPkg.SetDBFile
00da2766 +1be cMUD.exe PkgDM 2073 +29 TPkg.Open
00d5946f +11f cMUD.exe PrefDat 3359 +14 PkgData.Load
00c4a8ad +275 cMUD.exe PARENT 2584 +111 TParentForm.NewWindow
00c583e3 +04f cMUD.exe PARENT 8800 +29 TParentForm.FormShow
004a0c1d +015 cMUD.exe Forms TCustomForm.DoShow
00520e20 +01c cMUD.exe CustomForm 76 +7 TzCustomForm.DoShow
00a11b3e +046 cMUD.exe MultiForm 264 +2 TMultForm.DoShow
004a4f55 +0a9 cMUD.exe Forms TCustomForm.CMShowingChanged
004bb023 +2bb cMUD.exe Controls TControl.WndProc
004bf027 +4fb cMUD.exe Controls TWinControl.WndProc
004a1587 +553 cMUD.exe Forms TCustomForm.WndProc
00bf5904 +020 cMUD.exe DXSounds 2128 +9 TCustomDXSound.FormWndProc
00bf30a8 +00c cMUD.exe DXClass 635 +1 TControlSubClass.WndProc
004bacb0 +024 cMUD.exe Controls TControl.Perform
004be4ee +112 cMUD.exe Controls TWinControl.UpdateShowing
004be631 +0e5 cMUD.exe Controls TWinControl.UpdateControlState
004c0ee2 +026 cMUD.exe Controls TWinControl.CMVisibleChanged
004bb023 +2bb cMUD.exe Controls TControl.WndProc
004bf027 +4fb cMUD.exe Controls TWinControl.WndProc
004a1587 +553 cMUD.exe Forms TCustomForm.WndProc
00bf5904 +020 cMUD.exe DXSounds 2128 +9 TCustomDXSound.FormWndProc
00bf30a8 +00c cMUD.exe DXClass 635 +1 TControlSubClass.WndProc
004bacb0 +024 cMUD.exe Controls TControl.Perform
004b984a +026 cMUD.exe Controls TControl.SetVisible
004a0ebe +03a cMUD.exe Forms TCustomForm.SetVisible
004a0211 +071 cMUD.exe Forms TCustomForm.DoCreate
0049fdb0 +124 cMUD.exe Forms TCustomForm.Create
00520dbd +01d cMUD.exe CustomForm 60 +2 TzCustomForm.Create
00727655 +029 cMUD.exe International 41 +3 TInterForm.Create
00728109 +039 cMUD.exe zsForm 88 +6 TzForm.Create
00a1188c +0d0 cMUD.exe MultiForm 168 +12 TMultForm.Create
00c57a81 +0bd cMUD.exe PARENT 8562 +14 TParentForm.Create
004a98ae +06e cMUD.exe Forms TApplication.CreateForm
00dff150 +07c cMUD.exe CMUD 350 +18 initialization
76acecc9 +00c kernel32.dll BaseThreadInitThunk
|
|
|
|
|
|
Obyron
Novice
Joined: 29 Jan 2006
Posts: 40
Location: Aardwolf
|
Posted: Tue Jul 28, 2009 3:07 pm
|
Just to note I'm using regular CMud, not pro. Also, when I check the Packages folder in the install directory there is no default.pkg, just Clickable URLs, English Directions, English Keypad, and pkgcache.db.
|
|
|
|
|
jg1lbert
Wanderer
Joined: 09 Nov 2006
Posts: 55
|
Posted: Tue Jul 28, 2009 3:30 pm
|
Not sure how you figured that out Moo, I deleted the Packages folder, made a new one and everything is groovy again as far as starting up and exiting the program.
There was a "conversion" going on at first with mapper stuff, the mapper came up but no color/background. (another issue with #look doing nothing and #find crashing) Now that the package folder is new, the mapper is back to the old color. not sure how that folder had any relation to that problem but changed something in there... |
|
|
|
|
Zugg
MASTER
Joined: 25 Sep 2000
Posts: 23379
Location: Colorado, USA
|
Posted: Tue Jul 28, 2009 5:07 pm
|
In addition to checking the Packages folder, also check the folder above it (the main data files folder). Sounds like there are problems converting existing DEFAULT.PKG files. CMUD/CMUDPro does not distribute any default.pkg file. So any existing default.pkg file is from an older version of CMUD and might be corrupted.
If someone has a DEFAULT.PKG file that is causing this crash, please send it to me so that I can try to reproduce this problem.
| Quote: |
| Also, when I check the Packages folder in the install directory there is no default.pkg, just Clickable URLs, English Directions, English Keypad, and pkgcache.db. |
Be sure you are looking in the DATA FILES directory (normally My Documents/My Games/CMUD) and not the Program Files directory. |
|
|
|
|
Obyron
Novice
Joined: 29 Jan 2006
Posts: 40
Location: Aardwolf
|
Posted: Tue Jul 28, 2009 5:16 pm
|
Emailed mine.
|
|
|
|
|
Zugg
MASTER
Joined: 25 Sep 2000
Posts: 23379
Location: Colorado, USA
|
Posted: Tue Jul 28, 2009 5:19 pm
|
OK, I think I found this. I created my own DEFAULT.PKG file with v2.37 and was able to reproduce the crash.
The crash is coming from CMUD trying to display the progress window for the conversion of an old package file. Windows is trying to place this popup window as the child of the main application form. But when CMUD is loading the DEFAULT.PKG file, the main application window is not yet created/displayed, so that causes the Windows access violation when it tries to query the "Top" position of the main application form.
I added a test to see if the main application window isn't created and just return a top/left value of zero in that case to allow the program to continue.
I have re-uploaded new copies of v3.10, so download CMUD or CMUDPro again and give it another try to let me know if this is fixed. Note that I didn't change any version information, just the date of the files. |
|
|
|
|
Obyron
Novice
Joined: 29 Jan 2006
Posts: 40
Location: Aardwolf
|
Posted: Tue Jul 28, 2009 5:41 pm
|
Fixed for me by the update.
|
|
|
|
|
|
|
|
